110mm Low Back P Trap with a Single Socket

Buy a 110mm Low Back P Trap (Single Socket) Today at EasyMerchant

A back trap gully is usually situated outside the property, next to the wall where the waste, soil or rainwater pipes are connected to the sewer drainage system. They can also be utilised with surface water drains in paved areas.

The trap is used to contain foul smells and gasses and prevent odours from the sewer system from escaping into the environment. Your P Trap should always be installed at least 150mm below the damp course level, and for new installations, the appropriate planning permission should be acquired from your local authority.

All of our sockets are supplied with a captive pre-lubricated ring seal. As well as that, they are kitemarked to BS-EN1401 certification. That means our back traps will incorporate seamlessly with any other underground drainage product or existing installation operating with products or plastic drainage pipe fittings that feature the same kitemark standard. The majority of our product lines conform to the same standard so why not choose from our 110mm underground drainage fittings to complete your project?

Typical installations include:

• A 110mm underground drainage hopper
• A 110mm underground drainage coupler to connect the outlet to the drainage pipe
• 110mm underground drainage pipes
• Single socket bends to manage connections where required