116mm Deep Flow Gutter Angles

Order a 116mm Deepflow Gutter Angle Here

Colour: Black/white

Deepflow gutter systems are designed for properties where standard half round, ogee, square line, or cast iron systems just can’t hold enough flow. Deepflow systems are high capacity – making them ideal if you’ve got a large roof that channels a lot of water into a section of gutter.

Using a deepflow gutter angle

Although some properties have straight runs of guttering – many do not – so if you need to work around corners, deepflow gutter angles are vital.

We can provide either 90-degree or 135-degree deepflow gutter angles – giving you the versatility to work with different property and roof types. If you’re not sure exactly what you need – you’re welcome to get in touch with our expert customer service team who will help you pick the right product from our wide range of guttering systems.

Installing a gutter angle

Gutter angles don’t simply fix to the fascia like a bracket or union would – they’re entirely supported by the gutter run itself. As such, you should aim to have a fascia bracket either side of the angle – within 100mm – 150mm.

With the surrounding runs properly supported, the angle will simply snap into position. There are small lugs at the front and rear of either end – after locating the gutter under the rearmost, you can apply a little pressure and snap the front clip into position.

The watertight seal on each end of the angle means there’s no need for fixings or sealant to hold the connection together – like you would need with a half round gutter system made of cast iron.

Please see Downloads tab for Gutter Capacity Chart