Order ForgeFix Drywall Screw Black 3.5 x 35mm Box 1000 Coarse Collated Strip Here at EasyMerchant
These Forgefix Phillips, single thread Drywall Screws have a black phosphate finish for increased durability. Their Bugle Head allows the screw to sink effortlessly into the dry lining without the need for countersinking, which in turn minimises the damage to the surface.
They are supplied collated, with 50 screws per strip and 1,000 screws per box. Designed for fitting dry linings to studding.
Phosphate coatings are made up of thin crystalline layers of phosphate compounds that adhere to the surface of the fixing or fastener. The phosphate crystals are porous and can be formed from zinc, manganese, or iron phosphate solutions. Phosphate coatings offer good corrosion resistance and have an excellent ability to absorb supplementary coatings which improves appearance, corrosion resistance and resistance to abrasion.
The Phillips screw has four simple tapered slots. It is designed so that a Phillips tip screwdriver can turn a Phillips screw with increasing torque. When the torque gets to be too strong for the tip then the screwdriver tip winds itself out of the screw thus preventing over-tightening and or damage to the screw head.
Coarse thread screws (mainly drywall screws) have an extremely sharp point and are designed to penetrate plasterboard skin. The coarse thread eases in to the board then the timber baton holding the board firm.
Drywall Collated Screw Phillips Bugle Head SCT 3.9 x 45mm Box 1000
• Coarse Thread Specialist Screw.
• Head: Countersunk Phillips Drive Bugle.
• Finish: Black Phosphate.
• Flexible plastic collated strip designed specifically for use with mechanical screw fastening machines.
• Suitable for use with most makes of collated drywall guns.
|Size||3.9 x 35mm|
|Pack Depth (mm)||550|
|Pack Height (mm)||40|
|Pack Width (mm)||120|
|Pack Paper/Card Weight (gm)||163|
|Pack Plastic Weight (gm)||0|
|Insert Bit Size||No.2|
|Imperial Size||1 3/8″ x 8|
|Metric Size||3.9 x 35mm|
|Outer Depth (mm)||565|
|Outer Height (mm)||265|
|Outer Width (mm)||250|
|Drive Type||Phillips PH|