63mm to 32/40/50mm Boss Adaptor

Purchase Boss Adaptors 63mm to 32/40/50mm Online

PLEASE NOTE THIS ADAPTOR IS COMPATIBLE WITH PUSH FIT SYSTEMS ONLY AND WILL NOT FIT THE BOSSES ON THE SOLVENT SOIL FITTINGS

We hold a large stock of pipe boss adaptors – making it quick and simple to pick up the parts needed to fit either 32mm, 40mm, or 50mm waste pipes into standard 110mm soil systems via a fitting with a boss, e.g., 110mm Strap on Boss or a 110mm Solvent Weld Access Junctions.

Fitting

Fitting a solvent soil pipe adaptor is slightly more challenging than using push fit bosses – but is still a job that can be carried out with relative ease. First, you should make sure you select the appropriate solvent cement for the pipes you’re working with.

Your boss adaptor will need to sit in a dedicated boss pipe or within the boss shoulders of the fitting that suits the job you’re carrying out – when that’s connected to the stack, you should apply your solvent cement according to the product’s instructions and make your connection.

The off-centre nature of the adaptor allows it to be rotated before the solvent weld is created – so you can align your vent pipes neatly.

Remember, solvent weld joints cannot be separated when created – so you’ll be creating a permanent join.

Generally, water can be run through a solvent bonded joint within 20-30 minutes – but if possible, it’s best practice to leave your system 24 hours before testing.