110mm Push Fit Soil Pipe Branches

Buy a 110mm Push Fit Soil Branch. All angles and sockets available.

At EasyMerchant, we stock a huge range of high-quality, UK-made push fit soil and vent pipe branches to suit 110mm stacks. Whichever variation you choose, you’ll get a kite-marked product that you can be certain will stand up the highest standards.

Other names for Soil Branches:

• Stack Pipe Junctions
• Soil Junctions
• Vent Pipe Branches
• Waste Vent Pipe Junctions

We can provide T junctions in double (90-degree) and triple (135-degree) socket variations – as well as double (90-degree) and triple (135-degree) socket Y junctions.

Our branches are designed to be easily fitted – and the option of double or triple sockets allows you to pick a branch that’ll fit perfectly into the job you’re doing.

Fitting branches into your stack

Since our uPVC branches are designed to fit any 110mm soil systems, fitting requires minimal effort. With the pipe you’re connection to cut to length (for triple-socket branches), you should chamfer the edge you’re fitting to, to create a fairly smooth 45-degree angle.

When filed and smooth, you can either directly fit the branch – or, if you’re working with an especially tight fit, you can use a dedicated silicone lubricant to make the fitting even easier.

If you’re working with a double-socket branch, you’ll need to prepare the non-socket end in the same way – chamfering to 45-degrees then pushing into the socket on the existing pipework.

When fitted and secure, EasyMerchant’s range of branch fittings are suitable for high-temperature water discharges too.

We buy in bulk – so you don’t have to

We appreciate that not everyone needs to carry a stock of different branch fittings – so we do our very best to make sure we keep our costs as low as possible. To do so, we order soil pipe components in large quantities – before passing on our bulk buying discounts to you. Savings for us turn into savings for you – which is why we’re the UK’s number 1 builder’s merchant.