Acquire 110mm Solvent Weld Soil Access Bends Online
The solvent soil system is an extremely durable system, designed to provide solvent weld joints. All products are manufactured to BS4514/BS EN1329. The Solvent Soil Access Bend is available in most colours and completely compatible with EasyMerchant’s solvent weld waste system. Plus there’s simply no need for protection from ultra violet light when used externally due to the machine being manufactured to include a UV stabiliser to enable to system to maintain is colours when exposed to direct sun light.
Joints in the Solvent Soil Access Bends are made by brushing EasyMerchant’s solvent cement on the outside surface of the end of the pipe, and also onto the inside of the access bend. The solvent weld soil pipe is then instantly inserted into the the fitting where it can be twisted into the correct position to ensure a great bond. The solvent cement melts bonds them to make watertight joint and a permanent gas and the two surfaces. Water can be run through the joint within 20 minutes, although we recommend that the system is left for 24 hours before full testing. Solvent Weld joints aren’t demountable so care should be taken to make certain that all pipes and fittings are correctly aligned prior to building the joint.
Solvent Soil Access Bends, are available from EasyMerchant in Olive and Black Grey. Manufactured to BS EN 1329:2000, the Solvent Soil Pipe is totally compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems. Full range available at low prices with next day delivery available!