110mm Solvent Soil Access Junctions

Buy a 110mm Solvent Soil Access Junctions Today

The solvent soil system is an system designed to provide tough solvent weld joints. All products are manufactured to BS4514/BS EN1329. The Solvent Soil Access Junction is available in most colours and fully compatible with EasyMerchant’s solvent weld waste system. Plus there’s simply no need for protection from ultra violet light when used externally because of the system being manufactured to incorporate a UV stabiliser to enable to system to maintain is colours when exposed to direct sun light.

Joints in the Solvent Soil Access Junction are created by using EasyMerchant’s solvent weld on the exterior surface of the end of the pipe, and also onto the inside of the Solvent Soil Access Junction. The solvent weld soil pipe is then immediately inserted to the soil pipe fittings where it can be twisted into the proper position to ensure a great bond. The solvent cement actually melts the two surfaces and bonds them together to make watertight joint and a permanent gas. Water can be run through the joint within 20 minutes, although we recommend that the machine is left for 24 hours before full testing. Solvent Weld joints are not demountable so care should be taken to make sure that all pipes and fittings are correctly aligned prior to assembling the joint.

Solvent Soil Access Junctions are available from EasyMerchant in Black and Olive Grey. Complete range available at low prices with next day delivery available! Manufactured to BS EN 1329:2000, the Solvent Soil system is completely compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems.