110mm Solvent Weld Soil Access Pipes

Purchase 110mm Solvent Weld Soil Access Pipes Online Today

The Solvent Soil Access Pipe is an extremely durable product designed to provide secure solvent weld joints. All products are manufactured to BS4514/BS EN1329. The access pipe is available in most colours and fully compatible with EasyMerchant’s solvent soil vent pipe. Plus there’s absolutely no need for protection from ultra violet light when used externally due to the system being manufactured to incorporate a UV stabiliser to enable to system to keep is colours when exposed to direct sun light.

Solvent Soil Access Pipes are available from EasyMerchant in Black and Olive Grey. Full range available at low prices with next day delivery available! Manufactured to BS EN 1329:2000, the Solvent Soil range is completely compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems.

Joints in the Solvent Soil Access Pipes are made by brushing EasyMerchant’s solvent weld on the Exterior surface of the end of the pipe, and also onto the inside of the fitting. The 110mm solvent weld pipe is then instantly inserted to the fitting where it could be twisted into the proper position to ensure a excellent bond. The cement actually melts the two surfaces and bonds them together to make a permanent gas and watertight joint. Water can be conducted through the joint within 20 minutes, although we recommend that the machine is left for 24 hours before full testing. Solvent Weld joints aren’t demountable so care should be taken to make sure that all pipes and fittings are properly aligned prior to assembling the joint.