110mm Solvent Weld Soil Pipe Bends

Order 110mm Solvent Weld Soil Pipe Fittings Including Bends in all angles and sockets.

At EasyMerchant, we can provide a range of high-quality solvent soil bends – available as either 90.5-degree and 135-degree double socket or 92.5-degree and 135-degree single socket variations.

Our solvent stack fittings are available in either black or olive grey – and are compatible with all other manufacturers’ components.

Note: our solvent range is not kept in stock – instead, your order will be sent our by our partner company. Delays are very rare – but please keep this in mind when ordering.

How to fit solvent weld soil pipe fittings

Assuming you’re comfortable working with solvent weld, our range of 110mm fittings are easy to use. Remember, you should always work with burr-free, clean pipework – so it’s a good idea to use a primer/cleaner to prepare the lengths you’re working with.

When clean, it’s a good idea to slightly key the surface of the cut pipe you’re going to be inserting. This is best done with a fine glass paper. When you’re ready, apply a coat of solvent cement to both surfaces – ensuring an even, strong bond.

Quickly after applying the cement, make the join – and twist it back and forth slightly to make sure your cement is evenly coating the join. Cement will bond quickly – so get your join in the position you need.

The bond will be watertight within around 20 minutes – but it’s a good idea to leave the connection 24-hours before testing.

Separating a bonded connection

When bonded, the weld between the two sections will be permanent – and it will be impossible to separate. If you do need to separate the join, you’ll need to saw it out of your stack.

Bulk prices – direct to you

At EasyMerchant and our partner companies, we buy our products in bulk and pass our discounts on to you. That way – you can be confident you’re getting high-quality parts at unbeatable prices.