110mm Solvent Weld Soil Pipe Branches

Buy 110mm Solvent Weld Soil Pipe Fittings, including branches and junctions in all angles and sizes.

Here at EasyMerchant, we can provide a range of UK-made, high-quality solvent pipe fittings and branches – in a range of colours and angles.

Available in either black or olive grey, you can choose from 135-degree double or triple socket fittings – or 92.5-degree fittings, again available as either double or triple socket variants.

Bulk prices for individual components

By working with a trusted partner company, we can source solvent stack components at outstanding bulk price – and pass those exceptional price on to our customers. As such, you can be confident that you’re getting high-quality products at the best price – whether you’re ordering a one-off part or enough to create stacks across numerous properties.

Fitting branches and junctions

As solvent weld only parts, you’ll need to be comfortable using the appropriate cement to bond your junctions or branches into your stack.

When doing so, you should make sure your plain soil pipes are cut neatly – with any burrs removed. For the best join possible, it’s also a good idea to ‘key’ the surface of the plain run slightly – giving the cement the best contact area.

When you’re happy that your pipe is appropriately prepped, you can apply your cement and slide your lengths into place. When inserted, you should twist them back and forward for a moment to ensure an even distribution of cement. Each of our branches has internal shoulders that will prevent over-insertion of the 110mm run – so you don’t have to worry about fouling the flow through the junction in any direction.

After roughly 20 minutes, the join you’ve created should be watertight and completely set – although it’s a good idea to leave testing for a full 24 hours to make sure the cement has taken full effect and the weld has hardened appropriately.