110mm Solvent Soil Reducer Spigot Socket

Get 110mm Solvent Soil Reducer Spigot Sockets

The Solvent Soil Reducer Spigot Socket is a very durable fitting, designed to allow the connection between a solvent soil pipe and a solvent waste pipe. All products are manufactured to BS4514/BS EN1329. The machine is available in most colours and fully compatible with EasyMerchant’s solvent weld waste system. Plus there’s absolutely no need for protection from ultra violet light when used externally due to the system being manufactured to include a UV stabiliser to enable to system to keep is colours when exposed to direct sun light.

Joints from the Solvent Weld System are made by brushing EasyMerchant’s solvent weld on the outside surface of the end of the pipe, and also onto the inside of the soil pipe reducer. The solvent weld 110mm soil pipe is then immediately inserted into the the fitting where it can be twisted to the proper position to ensure a excellent bond. The solvent cement actually melts the two surfaces and bonds them together to make a permanent gas and watertight joint. Water can be conducted through the joint within 20 minutes, although we recommend that the system is left for 24 hours before full testing. Solvent Weld joints are not demountable so care should be taken to make certain that all pipes and fittings are correctly aligned prior to assembling the joint.

Solvent Soil Reducer Spigot Sockets are available from EasyMerchant in Black and Olive Grey. Manufactured to BS EN 1329:2000, the Solvent Soil process is totally compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems. Complete range available at low prices with next day delivery available!