Buy 110mm Solvent Soil Screwed Access Cap Spigot Tails Online
The Solvent Soil Screwed Access Cap Spigot Tail is a very durable fitting, designed to provide secure solvent weld joints when fit into a solvent soil socket and allows access for inspection. All 110mm solvent weld soil pipe fittings are made to BS4514/BS EN1329. The system is available in most colours and fully compatible with EasyMerchant’s solvent weld waste system. Plus there’s absolutely no need for protection from ultra violet light when used externally due to the machine being manufactured to include a UV stabiliser to enable to system to maintain is colours when exposed to direct sun light.
Joints in the Solvent Weld System are created by cleaning EasyMerchant’s solvent weld on the exterior surface of the end of the pipe, and also onto the inside of the soil pipe cap. The pipe is then instantly inserted into the the fitting where it could be twisted to the correct position to ensure a great bond. The solvent cement actually melts the two surfaces and bonds them together to make a permanent gas and watertight joint. Water can be conducted through the joint within 20 minutes, although we recommend that the machine is left for 24 hours before full testing. Solvent Weld joints are not demountable so care should be taken to make sure that all pipes and fittings are properly aligned prior to assembling the joint.
Solvent Soil Screwed Access Cap Spigot Tails available from EasyMerchant in Black and Olive Grey. Manufactured to BS EN 1329:2000, the Solvent Soil products are totally compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems. Complete range available at low prices with next day delivery available!