110mm Solvent Soil To Waste Adaptor
The Solvent Soil To Waste Adaptor is an extremely durable product, designed to provide safe solvent weld joints. All products are made to BS4514/BS EN1329. The soil pipe fitting is available in most colors and completely compatible with EasyMerchant’s solvent weld waste system. Plus there’s absolutely no need for protection from ultra violet light when used externally because of the machine being manufactured to include a UV stabiliser to enable to system to keep is colours when exposed to direct sun light.
Joints in the Solvent Weld System are Created by Cleaning EasyMerchant’s solvent weld on the Exterior surface of the end of the pipe, and also onto the inside of the fitting. The 110mm solvent weld pipe is then immediately inserted to fitting where it could be twisted into the correct position to ensure a great bond. The solvent cement actually melts the two surfaces and bonds them together to make a permanent gas and watertight joint. Water can be run through the joint within 20 minutes, although we recommend that the machine is left for 24 hours before full testing. Solvent Weld joints aren’t demountable so care should be taken to make certain that all pipes and fittings are properly aligned prior to building the joint.
110mm Solvent Soil To Waste Adaptor, available from EasyMerchant in Black and Olive Grey. Manufactured to BS EN 1329:2000, the Solvent Soil products are completely compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems. Full range available at low prices with next day delivery available!