110mm Solvent Weathering Collar

Buy a 110mm Solvent Weathering Collar

The Solvent Weathering Collar (also known as a port flashing sleeve) is an extremely durable product, designed to fit over a 110mm Soil & Vent Pipe to divert rainwater on the aluminum or lead flashing at the point where the pipe protrudes through the roof of a building. All products are made to BS4514/BS EN1329. The solvent weld 110mm pipe fittings are available in most colours and fully compatible with EasyMerchant’s solvent weld waste system. Plus there’s simply no need for protection from ultra violet light when used externally because of the machine being manufactured to include a UV stabiliser to enable to system to keep is colours when exposed to direct sunlight.

Joints in the Solvent Weld System are Created by Cleaning EasyMerchant’s solvent weld on the Exterior surface of the end of the pipe, and also onto the inside of the fitting. The pipe is then instantly inserted into the the fitting where it could be twisted into the proper position to ensure a excellent bond. The solvent cement actually melts the two surfaces and bonds them together to make a permanent gas and watertight joint. Water can be conducted through the joint within 20 minutes, although we recommend that the machine is left for 24 hours before full testing. Solvent Weld joints aren’t demountable so care should be taken to make sure that all pipes and fittings are correctly aligned before assembling the joint.

Solvent Weathering Collars, available from EasyMerchant in Black and Olive Grey. Full range available at low prices with next day delivery available! We keep everything from bends, junctions to weathering collars to soil pipe caps. Manufactured to BS EN 1329:2000, the Solvent Soil process is totally compatible with other systems and integrates with EasyMerchant’s Solvent Weld Waste and Underground drainage systems.