112mm Half Round Gutter Union

Purchase a 112mm Gutter Union Connection Bracket at EasyMerchant

Connectors – gutter union bracket suitable for 112mm plastic guttering sizes. 

Colour – Black/white/grey

As part of our extensive stock of rainwater systems – we carry these half round 112mm gutter union connectors – an essential item if you’re installing a plastic system and need to connect lengths of guttering run.

Remember – we buy all our 112mm guttering components in bulk – and we pass our discounts on to you. Whether you’re ordering a single gutter union bracket connector or you need systems for a full new estate – you can be absolutely confident you’ll get the best price when you order through EasyMerchant.

Fitting a gutter union bracket

Fitting a gutter union connector is an easy part of putting up a full system – as the connector essentially replaces a single fascia bracket.

As such, it’s a good idea to account for each union bracket when you’re measuring up for your installation. Your first bracket should be within 150mm of the end of the run – and each subsequent bracket should fall away towards the outlet. When you know how many guttering lengths you’re going to need, you’ll be able to mark the location of the connector – then place your fascia brackets accordingly.

When the time comes to fit your guttering into the connector, you should locate the rear of the gutter section under the lug at the back of the connector – then, with a little downward pressure – the front of the section will snap under the lugs at the front.

Each gutter union bracket is kitemarked for your peace of mind

When you walk away from a guttering job – you need to know it’s going to stand up to the elements for a long time. As such, it’s important to know you’re using high quality components – and at EasyMerchant, that’s exactly what you get. We make sure every gutter union bracket and guttering fixing/accessory we sell meets or exceed British Standards – and always carries a kite mark to prove it.