Buy 116mm Deepflow Gutter 4m Today (high capacity)
Deepflow gutter colour: Black/White
Standard half round domestic guttering products don’t always provide enough rainwater channelling for a property – especially if you’ve got a steep roof, an especially large roof, or a very small section of guttering. In situations like these a half round gutter can overflow quickly.
With this in mind, we carry a stock of high capacity deepflow plastic guttering – designed to channel significantly more water than standard cast iron, half-round, ogee, or square line designs. Part of that deepflow gutter wide range are these – 116mm gutter lengths in 4m sections.
Installing a deepflow gutter
Like standard half round products, the actual installation of gutter lengths is perhaps one of the easier parts of an overall guttering fit.
With the fascia brackets in place and your running outlet mounted appropriately, you can begin snapping guttering runs into their resting place.
Similar to half round designs, deepflow brackets have a lug at the front and the rear that’s designed to hold guttering solidly. Simply locate the rear of the run under the lip – then, supporting the bracket, place slight pressure on the front of the gutter to snap it into place.
Unlike cast iron, there’s no need to use fixings or sealant – and if you need to connect two or more lengths of run, you can use a union joiner which will mount directly to the fascia.
|Gutter capacity with outlet in centre of run:
|Gutter Level: 3.77 Litres/Sec
1:600 Gradient: 4.60 Litres/Sec
|Gutter capacity with outlet at end of run:
|Gutter Level: 1.87 Litres/Sec
1:600 Gradient: 2.29 Litres/Sec
|116mm Deep Flow Guttering
|120mm Deep Flow Gutter 4m
|Single Person Installation:
|BS4576/ EN607/ EN1462
Please see Downloads tab for Gutter Capacity Chart