Order 110mm Push Fit Soil 90 Degree Adjustable Bends
Traditionally, soil vent pipes were made from cast iron, now they are most commonly manufactured from uPVC (vinyl ). Plastic soil pipes permit the elimination of waste or filthy water from baths, showers, bathrooms and sinks, while also allowing odours to be expelled over the structure through a stack port, at a stage at which the odour released won’t cause a nuisance. The pipe’s vents also allow air into the internal drainage system to have the ability to ease the process of aerobic sewer digestion, preventing a siphoning effect from occurring, and allowing free flow of water.
Approved document H: Requires that the foot of a soil and vent stack should have as large a radius as possible, rather than less than 200mm at the centre line. Ventilating pipes should finish at least 900mm over any opening within 3m and should be completed with a wire cage or other perforated cover. Soil and vent pipes must maintain sufficient downward slope in their length to keep liquids and solids flowing freely towards the drain. If a downward incline isn’t feasible, a collection pit using a’sewer ejector’ pump could be installed. It’s frequently joined to the exterior of a structure (even though it may be fitted internally) and joins the underground drainage system to a point just above the sum of the roof gutter.
Soil pipes run vertically from the underground drainage systemup the side of the property to the roof level. It is the pipe that carries waste water to the sewage system. The bathrooms and the soil pipe by means of a connector will join together, and waste water from this property’s sinks, toilets, showers and appliances will be connected with the waste pipes into the soil pipe by way of a boss connection.
Soil pipe may be called port pipe, as at roof level a port will be set up to permit air flow into the system, preventing a vacuum and releasing gasses and some other scents. . We maintain stock both push fit soil and solvent soil ranges in 110mm, in black and grey. We keep the full range of fittings from bends, couplers, 110mm soil pipe reducers, junctions, waste adaptors, pipe collars and more.