Get Cascade Cast Iron Effect Gutter Bracket Here
Brett Martin Cascade cast iron effect guttering is designed to imitate cast iron guttering, ideal for properties that are complimented well with a cast iron style gutter, while remaining affordable and easy to install. Available in 112mm Half round and 115mm Deep flow.
Cast iron effect gutter brackets are for securing a run of guttering to the fascia board, supporting the guttering through the roughest of weather conditions.
Gutter brackets should be installed once the running outlet has been positioned and fixed to the fascia board in the location above where the downpipe is required to discharge. The first bracket should be installed on the opposite side end of the fascia board allowing for the required fall towards the running outlet, and be fixed no more than 150mm from end point of the gutter run.
When in place, tie a tight line between the outlet and the bottom of the first bracket, using this as a guide, you can install the full run of brackets at equal intervals, no more than 900mm apart. When you’re working with angles and corners, you should make sure the brackets are fitted no more than 100mm from the edge of the fascia corner.
Although our gutter brackets are supplied in black, we can provide a range of other colours, including: Porcelain White, Anthracite Grey, Oxford Blue, Olive Green, Graphite Grey, Sandstone and Chartwell Green. If you require one of these options – get in touch on the phone or using our online chat service, and we’ll arrange a quotation.
SpecificationsSize: 112mm Depth: 51mm Material: uPVC Type: Cascade Half Round Colours: Black Weight: 0.063kg Product: 112mm Half Round Cascade Gutter Bracket Tested to: BS EN 607:2004 & BS EN ISO 9001:2015 Kitemarked: Yes Brand: Brett Martin Size: 115mm Depth: 75mm Material: uPVC Type: Cascade Deep Flow Colours: Black Weight: 0.074kg Product: 115mm Deep flow Casacade Gutter Bracket Tested to: BS EN 607:2004 & BS EN ISO 9001:2015 Kitemarked: Yes Brand: Brett Martin