Hyperion Explorer – Composite Decking Corner Trim

Purchase Hyperion Explorer – Composite Decking Corner Trim in Various Colours from EasyMerchant

These composite decking corner trims are designed to help give you a perfect edge to your Hyperion composite decking.

A corner trim can be used to cover the edges of any exposed sides or substructure as below –

1. Measure the required amount of corner trim and cut down to size. if you are installing around a corner, mitre the ends at a 45° angle
2. Cover the edge of your composite decking boards with the corner trim and attach with screws.
3. Drill 4mm countersunk pilot holes
4. Fix using 50mm countersunk screws  – be careful not to overdrive the screws through the composite material, it is recommended to finish tightening by hand.

Made from environmentally friendly recycled plastics and wood fibres, this system is low maintenance and highly stable. When compared to traditional wooden decking, the Hyperion Composite Decking offers many advantages including higher slip resistance, maintaining it’s appearance for longer and it comes in a range of colours that do not require staining or sealing, cutting down the time between starting your garden project and enjoying the end result. The blend of recycled plastic and wood fibres creates a durable, low maintenance, versatile alternative to wooden decking which is rot resistant to warping, pests and rot.

Maintaining your new composite decking couldn’t be easier, simply clean it regularly with soap and water to keep it looking as good as the day it was installed. Not only does this save time but it also reduces costs as you will not need to invest in costly wood stains to keep your decking looking fresh.