Buy MetroPave Ground Reinforcement Grids Online at EasyMerchant
We stock two different types of plastic paving grids, the MetroPave and MetroPave Plus systems. They simply clip together to form the required area size. They are commonly installed on driveways and garden paths to hold pebbles in place helping to stop the loss of the pebbles over time and strengthen the ground so that the traffic moving over it doesn’t cause pitting or rutting.
MetroPave
The Naylor MetroPave grid is Made from 100% recycled plastic and is designed to withstand loading found in domestic and pedestrian settings such as driveways, paths and shed bases. Units can be installed with grass or gravel to suit the local environment and are fully SuDs compliant.
Suitable for:
- Garden paths
- Shed bases
- Domestic parking
- Pedestrian walkways
- Verge reinforcement
- Bank stabilisation
Specifications: | |
Size: | 480x480x40mm |
Material: | 100% Recycled HDPE/PP Blend |
Type: | Gravel Grid |
Pack Size: | 1 |
Colours: | Black |
Weight: | 0.7kg |
Product: | Metropave |
Connection: | 4 Interlocking Lugs Per Side |
Quantity/m2: | 4.3 |
Manufacturer: | Naylor |
Infill Volume: | 0.034m3 per m2 |
Infiltration Rate: | >5,000mm/hr |
MetroPave Plus
The Naylor MetroPave Plus grid is made from 100% recycled plastic, is designed to withstand higher and more regular loading compared to the standard MetroPave. These gravel grids are intended for use in commercial car parks, and car access roads. It can withstand occasional HGVs loadings for emergency access. Units can be installed with grass or gravel to suit the local environment and are fully SuDs compliant.
Suitable for:
- Garden paths
- Shed bases
- Commercial & Domestic parking
- Pedestrian walkways
- Bridleways
- Equestrian
- Verge reinforcement
- Bank stabilisation
- Commercial car parks
- Overflow car parks
- Park & ride schemes
- Access roads
Specifications: | |
Size: | 500x500x40mm |
Material: | 100% Recycled HDPE/PP Blend |
Type: | Gravel Grid |
Pack Size: | 1 |
Colours: | Black |
Weight: | 1.2kg |
Product: | Metropave Plus |
Connection: | 4 Interlocking Lugs Per Side |
Quantity/m2: | 4 |
Manufacturer: | Naylor |
Infill Volume: | 0.035m3 per m2 |
Infiltration Rate: | >5,000mm/hr |
Slopes and Pinning:
MetroPave Plus grids can be laid on slopes of up to 15 degrees without additional pinning or staking. Where the grid is used on the underside of a bridge abutment (e.g. to comply with the HSE recommended limits) every unit should be staked, and the sand bed stabilised with a 12:1 cement mix on the 40 – 45 degree slope. Pinning the grids to stop lateral movement on slopes can be easily done with a U Shaped pin through the recessed central grid on the MetroPave Plus and on any of the recessed walls running across the centre of the grid. Edges can be pinned using a U pin over the extend interlock to secure the outermost edge.
Reviews
There are no reviews yet.