Aluminium Box Gutter Length 1/2/3m Lengths

Buy Aluminium Box Gutter Length 1/2/3m Lengths – Joggle Joint Here

Pressed Aluminium Box Gutters have become a popular choice for industrial, housing and steel frame purposes. Sizes range from 100x75mm to 200x150mm and come in a range of standard colours as well as non-standard by request colours.

These aluminium guttering products are ideal for projects such as: self-builds, housing developments, and refurbishments, boasting a clean look and a low price.

Our aluminium box gutter lengths come in 1, 2, and 3 metre lengths and a wide range of dimensions, and can be ordered in four colours to suit your personal taste: mill finish, pure white, anthracite grey, and jet black. These aluminium box gutter lengths are lightweight and strong with a high flow capacity and are less expensive and easier to install than other types of guttering. If you need any other aluminium gutter products, such as an aluminium box gutter angle, running outlets, or downpipes, check out the rest of our range, and if you need advice on which products would suit your project, just contact our team for advice.

 Manufacturer Information:

• High Strength Aluminium Sheet 1050AH14
• Fittings made by cut/ mitre and welding
• 100% recyclable
• Radius and Special fittings can be provided
• Mill finish or powder coated to specific RAL/BS colour
• Lightweight

Installation

Gutter to be fitted on brackets at 750mm centres with an additional bracket required for all running outlets and angles no further than 375mm from joint.

For Direct Fix, gutter to be secured via pre-drilled holes at 750mm centres with M5x25mm stainless steel countersunk screws (dependent on substrate).  All fittings should also be secured via the pre-drilled holes. All fixings are supplied with each box guttering length.

Joints to be made by applying two beads of Arbosil 1096 Low Modulus Sealant onto the plain ended gutter, the joggle joint is located from above and secured using M6x20mm aluminium bolts, neoprene washers and nuts. Expansion gaps of 3-4mm to be left between butt ends.