Get a 68mm Round Downpipe Branch 112.5 Degree Online
112.5 degree x 68mm
Colour: Black, White, Grey, Anthracite Grey
There are lots of instances when you’ll need to connect two downpipes to one – especially when you’re fitting plastic guttering on roofs of different levels – for instance, a main guttering run and the smaller, lower run on a porch, garage, or single storey outbuilding.
If you need to bring two downpipes together – a branch is one of the neatest ways to do so. This 112.5 degree branch is perfectly shaped to meet up with the fall created by a 112.5 degree offset bend – making it quick and easy to put together and neat and tidy stack that gets the job done.
Fitting a 112 degree branch
Downpipe branches benefit from the same push-fit style connections you’ll find throughout many modern plumbing systems – and this allows for easy maintenance should you ever need to disassemble the stack for maintenance reasons.
As such – fitting is quick and simple.
With your downpipe sections cut to the right length and chamfered to a 45 degree angle, the branch will simply slip into place. The seal inside the socket makes for a watertight join – and this watertight seal is maintained – even if you need to use a silicone sealant to ease the connection.
When your branch is in place, it’s a good idea to back it off by a couple of millimetres to allow for any expansion and contraction.
|Colours:||Black, White, Grey, Anthracite Grey|
|Product:||68mm Downpipe branch 112.5°|
|Certification:||BS EN 607:2004|