Ogee Union Bracket

Buy an Ogee Gutter Union Bracket at EasyMerchant

An Ogee Union Bracket is used to join two lengths of Ogee Guttering together and seal them in place.

Connecting your gutter union is an easy part of installing your system as it just replaces one of your ogee gutter brackets. We always recommend starting with accounting for each union bracket when you do your initial calculations. Your first bracket should be no more than 150mm from the end of your run with no more than 800mm between the subsequent brackets. Your run should have a fall away towards to the outlet as this will help the flow of water towards your downpipe. Once you know how many lengths of guttering you need for your job, you will then be able to mark out where your union needs to go and place your fascia brackets accordingly.

To fit your guttering into your connector, locate the rear of the gutter section under the back lug on the connector. Apply a little downwards pressure to snap the front of the guttering underneath the lug at the front of the union.

• Dimensions are 120mm / 65mm
• Available to order now in black
• Also available in brown, white, caramel and grey on request

These union brackets are suitable for both domestic and industrial use, and are made out of durable UPVC, so can stand up to tough weather conditions.

Please see Downloads tab for Gutter Capacity Chart