Get a 110mm Push Fit Soil Accessible Branch 92.5 Degree Triple Socket Today
If you’re putting together a soil stack, having soil stack pipe access branch points is essential if you want to make sure you can enter the system with testing equipment or cleaning rods.
At EasyMerchant, we carry a range of access solutions at low costs – in either black or grey.
Made with push fit sockets, a branch access pipe is easily installed when you’re creating a soil system. Each socket has a captive ring seal, so when you’ve chamfered the end of the pipe you’re fitting, it’ll push into place. Shoulders beyond the ring seal within the pipe stop the pipe being pushed too deeply into the connection too – so you can be confident you won’t inhibit access.
If the 110mm push fit pipe you’re fitting proves to be too tight, the application of a suitable silicone lubricant will ease installation while maintaining a watertight seal.
Meeting British Standards
Our push fit components are always manufactured to British Standards – and carry a kite mark for your peace of mind.
As well as meeting manufacturing standards, access branches also mean you can make sure you job meets building regulations too. You should ensure there’s an access point into a soil system stack every 3 storeys for buildings over 3 storeys in height – and commercial buildings should have stack access points on every floor.
If you plan to have ground floor appliances attached to the stack, you’ll need to make sure your system’s access point is higher than the spillover level for those appliances.
We appreciate that not every job requires bulk-buying materials – so, at EasyMerchant, we make sure you get bulk discounts, even for single products. We buy our stock in large quantities – and we pass our savings on to you. The result? Outstanding quality, UK-made materials at a fraction of the price you’d pay elsewhere – and always delivered quickly.
|Push Fit Soil Pipe Fitting
|110mm Push Fit Soil Pipe Access Branch
|BS4514 EN 1329-1