Purchase a 110mm Push Fit Soil Pipe Access
When you’re creating a soil and vent pipe, access points are vital if you want to make sure the system can be either rodded or tested. At EasyMerchant, we can provide high-quality double socket access pipes at a low cost – and in either black or grey.
The 160mm access pipe is single socketed where as the 110mm access pipe is double socketed.
An access socket is easily fitted into a push fit system. Each end of the pipe has a captive ring-seal socket, so you’ll simply need to chamfer the end of the 110mm push fit pipe you’re connecting to – before sliding the socket into place. The access joint is designed with a shoulder that prevents over-insertion of the soil pipes, so you can be certain you won’t inhibit access when it’s required.
If the fit is too tight, a silicone lubricant will help fitting without compromising the watertight joint.
While our soil system access pipe sockets are manufactured to British standards – there are also building regulations to take into consideration when you’re creating a stack. For domestic buildings across more than 3 storeys, access needs to be available at 3 storey intervals. If you’re fitting a stack in a commercial building, you will need to provide access on each floor.
If ground floor appliances will be connected to the soil pipes, your system should be designed so the access point is higher than the spillover level of the appliances.
Wholesale prices direct to you
We know it isn’t always practical to buy items in bulk for one-off jobs or small DIY projects – and that’s exactly why we pass our bulk-buy discounts on to you. With no minimum order requirements, you can be certain that you’ll get the very best prices for high-quality, UK-made components.
With all our orders shipped in 1-3 business days, you can be confident that you’ll have materials with you quickly, at industry-leading prices.
|Soil Pipe Fitting
|110mm/160mm Push Fit Soil Access Pipe
|BS4514 EN 1329-1 – BS EN 1329:200