More info on our 100mm ducting 90-degree bend products
All the cheap twinwall duct we provide is manufactured to BBA and BS EN1386 as required by the Highways Agency. When you buy from EasyMerchant – cheap doesn’t mean low quality!
These are BBA Certified Rigid Duct Bends.
What does a ninety degree bend do?
Ducting products are made out of HDPE – High Density Polyethylene. As a manufacturing product, it’s extremely tough and notch resistant – but angles can only really be created with long radius bends – which isn’t always practical.
A ninety degree bend is a shorter, fixed section of underground electrical ducting that more drastically changes the direction of the duct for instances when you need to negotiate a corner or work around an obstruction.
How do you fit a ninety degree bend?
Fitting a ninety degree duct bend is fairly simple. First, you’ll need to make sure that you’ve neatly cut the end of the duct you’re hoping to change the direction of – being sure to keep the cut free from burrs and debris.
To join a ninety degree bend with a cut section of duct, you’ll need to use a connector. The connector simply slips over the top of the cut duct – and, if you need it to be water-tight, you can add a seal in the 2nd or 3rd rib/vally in the outer corrugated surface of the duct.
With this in place, the ninety degree bend will also just push into place, again – with a seal if required.
UK made for your peace of mind
At EasyMerchant, we’re in the trade – so we understand how important it is to use products that are high-quality – without breaking the bank.
This is why we buy all our UK-made products in large quantities – so you can be sure that you’re buying the best products – but getting them at the best prices on the internet.