MDPE Wall Plate Elbow

Buy an MDPE Wall Plate Elbow Here!

EasyMerchant has one of the broadest ranges of MDPE fittings available with dimensions ranging from 16mm to 900mm, pressure ratings 0 bar to 25 bar, requiring virtually all existing pipe ranges, imperial and metric like polyethylene, lead, copper and galvanised. We pride ourselves but also on our high quality of delivery service and after-sales support. MDPE Compression / mechanical fittings provide solutions for connecting MDPE pipes, used for conveying water and other fluids in infrastructure, industrial, mining, landscape, farming along with optical fibre duct systems. The fittings are made to withstand working pressures of up to 16bar, and these fittings are made in most common diameters.

Fitting instructions:

*For Diameter Sizes 20-110mm

1. Insert liner into the pipe (metric 20mm-63mm only) and slacken nut till half the thread is visible
2. Push MDPE pipe into the body of the fitting, through the nut, split ring, and ‘O’ ring
3. Tighten the nut firmly: Hand tighten onto the pipe
   20mm (½”) – 32mm (1”), on pipe 40mm
   (1 ¼”) and above use a compression fitting pipe wrench.

Note: For pipe diameters, 40mm and above, chamfering and lubrication of the pipe will be needed to help ease insertion of the pipe into the fittings. Use a silicon-based lubricant).