Buy a 110mm Push Fit Soil Double Socket Short Boss Pipe – 110x63mm
We keep stock in both push fit soil and solvent soil ranges in 110mm, in grey and black.
Soil pipes permit the removal of waste or filthy water from baths, showers, toilets and sinks, while also allowing odours to be expelled over the structure through a vent, at a level where the odour released will not cause a nuisance. The pipe’s vents also allow air to the internal drainage system to give the capacity to ease the process of aerobic sewer digestion, preventing a siphoning effect from occurring, and allowing free flow of water.
It is the pipe that carries waste water to the sewage system. The baths and the soil pipe by way of a connector will connect together, and waste water from the house’s sinks, toilets, showers and appliances will be joined by the waste pipes to the soil pipe by means of a supervisor link. Soil pipe may be called soil vent pipe, as at roof level that a cowl will be installed to allow air flow to the system, preventing a vacuum and releasing any gasses and scents.
Approved document H: Requires that the foot of a soil and vent stack should have as large a radius as possible, rather than less than 200mm at the center line. Ventilating pipes should finish at least 900mm over any opening within 3m and must be completed with a wire cage or other perforated cover. Soil and vent pipes should maintain adequate downward slope in their span to keep liquids and solids flowing freely towards the drain. If a downward incline isn’t feasible, a collection pit using a’sewer ejector’ pump could be installed. It’s frequently joined to the exterior of a structure (even though it may be fitted internally) and joins the underground drainage system to a point just over the roof gutter.
We keep the full range of fittings in black and grey, with white available with a small extra lead time. Everything from bends, couplers, junctions, 110mm soil pipe reducers, waste adaptors and more. All waiting and ready to go.