Purchase Blue Twin Wall Water Duct Pipe x50m Coils with Draw Cord Online Here
Coils of blue twin wall water pipe ducting for the protection of blue MDPE water mains pipes. The pipe comes complete with a drawcord and coupler/joiner and has ribbed outer surface and smooth inner surface.
Twin wall water pipe ducting are available as wall coils of pipe in lengths of 50m. They can be found in diameters from 63mm to 110mm. Blue duct coils are supplied with a draw cord allowing the installer to pull the water mains pipe through the water duct pipe with minimal effort. High-density polyethylene (HDPE) water ducts are seen in solid-wall, twinwall duct smooth bore and single-wall corrugated profiles. It needs very little preparation and it’s impact resistant and has joints for an effortless setup. All blue twin wall water ducting coils are supplied complete with draw strings contained. Our blue water twin wall ducting provides the advantages of a standard product together with extra durability and strength. The twin wall water duct coils are blue and toughness ratings are fully satisfied by their wall thicknesses. They’re also provided to match NJUG recommendations – in this case the pipe is blue to signify that water mains pipes are protected inside of the duct pipe. The pipe can be supplied in 6 metres lengths or 50 metre coils. The interior wall is smooth to avoid the pipe catching when it is pulled through the water pipe ducting. If required, a joint could be done by utilising two pipe seals along with a coupling.