Purchase 110mm Drainage Pipe Fittings Including Bends in all Angles & Sockets
110mm (4 inch) sewer pipe bends in double and single socket, and angles from 11.25 to 90 degree.
Fittings are made from Polyvinyl Chloride (PVC-U). Gully grids, and inspection chambers are manufactured from polypropylene. All 110mm drainage pipes and fittings are manufactured in brown unless otherwise stated.
The single socket bend comes with one spigot end that can be inserted into the socket of another fitting, like a junction or a manhole base. The fitting’s ends are made to accept a length of pipe. If this pipe was cut to length it should be chamfered and lubricated with pipe lubricant prior to being pushed into into the socket to ensure the best possible seal.
The end that’s socketed may also be used along with fittings which have a spigot, such as single socket bends or bottle gullies. If you’re unsure of the exact bend that you might need, then you could use an adjustable bend. The clever design of the fitting allows it to be rotated to any angle between 0 and 90°. When the angles on your installation don’t really line up having one of these fittings can save a massive amount of time!