Solvent Waste 90 Degree Knuckle Bend 32/40/50mm

Buy Solvent Waste 90 Degree Knuckle Bends 32/40/50mm

• Available in bright white, grey and black.
• Manufactured in high quality uPVC
• Stronger, heavier duty fittings than market alternatives.
• Complies with latest European standards: Fittings to EN1329-1 ; Pipe to EN1566-1 & BS5255:1989
• Withstands temperatures to 70 degrees Celsius.
• Extremely competitive prices.

Solvent waste requires a slightly more intensive setup over for example the push fit system that merely pushes together – as solvent waste joints will require proper preparation and then for solvent cement to be applied and left to dry for 24 hours before it pipework may be used to transmit water. Otherwise there is the risk that the joints have not bonded correctly and flows could occur. However once bonded, the joints are much longer lasting than some of those other waste systems. That is why solvent waste systems would be the go to waste system for most plumbers.

Produced from UPVC, to 1566-1:2000 Standards. This shatter proof material is strong, durable and Conforms to BSEN. The UPVC Solvent Waste 90 Degree Knuckle Bends comes in three sizes: 50mm, 40mm and 32mm and three colour options: Bright white, Black & Grey. The range, which meets the requirements of BSEN, BS5255 & 1329-1:2000 also conforms to the European standards, and provides a choice of solvent waste bends to meet virtually every requirement. Easy to handle and easy to fit, the solvent waste pipe range provides the installer and specifier the best of both worlds – best quality product, at a price to match anything available on the market.

At EasyMerchant we try to bring you the best quality Solvent Waste 90 Degree Knuckle Bends at the best possible prices. We also wish to send them to you as quickly and accurately as you can. That is why we’re positive you’ll be delighted with some of the Solvent Waste 90 Degree Knuckle Bends available and return again the next time you’re in need!