Order 110mm Push Fit Soil Blanking Plugs Today
We maintain stock in both push fit soil and solvent soil ranges in 110mm, in grey and black, white is available, but please call as there will be a lead time.
110mm pushfit soil blanking plugs (somtimes known as blanking caps or soil pipe caps) allow the installer to safely “cap off” a socket from another unused soil pipe or fitting.
Soil pipes permit the removal of waste or filthy water from baths, showers, bathrooms and sinks, while also allowing odours to be expelled over the structure through a vent, at a level at which the odour released won’t cause a nuisance. The pipe’s vents also allow air into the internal drainage system to give the ability to ease the process of aerobic sewer digestion, preventing a siphoning effect from occurring, and allowing free flow of water.
It is the pipe that carries waste water down to the sewage system. The baths and the soil pipe by means of a connector will connect together, and waste water from the property’s sinks, toilets, showers and appliances will be joined by the waste pipes into the soil pipe by means of a boss connection. Soil pipe is sometimes called vent pipe, as at roof level a cowl will be installed to allow air flow into the system, preventing a vacuum and releasing any gasses and scents. Black and grey waste pipe 110mm comes in 3m lengths with a socket included that contains a pre-lubricated sealing ring.
Approved document H: Requires that the foot of a soil and vent stack should have as large a radius as possible, as opposed to less than 200mm at the center line. Ventilating pipes should finish at least 900mm over any opening within 3m and must be completed with a wire cage or other perforated cover. Soil and vent pipes should keep sufficient downward slope in their span to keep liquids and solids flowing freely towards the drain. If a downward incline isn’t feasible, a collection pit with a’sewer ejector’ pump could be installed. It’s frequently connected to the exterior of a structure (even though it may be fitted internally) and connects the underground drainage system to a point just above the roof gutter.