Buy a 110mm Push Fit Soil Waste Manifold Online
We keep stock in both push fit soil and solvent soil ranges in 110mm, in grey and black.
Soil pipes permit the removal of waste or filthy water from baths, showers, bathrooms and sinks, while also allowing odours to be expelled over the construction through a port, at a level where the odour released won’t cause a nuisance. The pipe’s vents also allow air to the internal drainage system to give the ability to facilitate the process of aerobic sewer digestion, preventing a siphoning effect from happening, and allowing free flow of water.
It’s the pipe that carries waste water from the bath or applicances, a 110mm soil pipe connector connects the pipes together, and waste water from the property’s sinks, toilets, showers and appliances will be joined by the waste pipes into the soil pipe by means of a boss link. Soil pipe may be called effluent pipe, as at roof level that a cowl will be installed to allow air flow to the system, preventing a vacuum and discharging any gasses and scents.
Ventilating pipes should finish at least 900mm over any opening within 3m and must be finished with a wire cage or other perforated cover. Soil and vent pipes should keep sufficient downward slope in their span to keep fluids and fluids flowing freely towards the drain. If a downward incline is not feasible, a collection pit with a’sewer ejector’ pump could be installed. It’s frequently connected to the exterior of a structure (even though it could be fitted internally) and joins the underground drainage system to a point just over the roof gutter.
At EasyMerchant we keep the full range of 110mm soil pipe fittings in stock, we pick and pack them with a high degree of care and chose our products due to their high quality and accordance with British Standards