Order Plasson MDPE Watermains 90° Repair Tees – WRAS Approved Online!
EasyMerchant has one of the broadest ranges of MDPE pipe to copper fittings available with measurements ranging from 16mm to 900mm, pressure ratings 0 bar to 25 bar, requiring nearly all existing pipe ranges, imperial and metric such as polyethylene, lead, copper and galvanised. We pride ourselves but also and after sales service. MDPE Compression / mechanical fittings provide solutions for linking MDPE pipe, used for distributing water and other fluids in infrastructure, industrial, mining, landscape, farming in addition to optical fibre duct systems. The fittings are made to withstand working pressures of up to 16bar, and these fittings are manufactured in all common diameters.
*For Diameter Sizes 20-110mm
- Insert liner into pipe (metric 20mm-63mm only) and slacken nut till half the thread is visible
- Push MDPE pipe into the body of the fitting, through the nut, split ring, and ‘O’ ring
- Tighten the nut firmly: Hand tighten onto the pipe
20mm (½”) – 32mm (1”), on pipe 40mm
(1 ¼”) and above use a compression fitting pipe wrench.
Note: For pipe diameters 40mm and above, chamfering and lubrication of the pipe will be needed to help ease insertion of the pipe into the fittings. Use a silicon based lubricant).